| Wireless
Thermometers:
Frequently Asked Questions
How should I fix a weather station/wireless thermometers
that has not started properly?
In order to establish proper communication between the display and
outdoor transmitter it is important that they be set up as follows:
1. Bring both units inside and have the units 3-5 feet apart with
nothing in-between them.
2. Remove the batteries from both units.
3. Press one of the buttons on the display at least 20 times to
clear all memory. Verify that the display is blank before proceeding.
4. Using a good quality alkaline battery place them back into the
remote sensor; making sure they are installed according to the diagrams
in the battery compartment. Next, taking care not to press any buttons,
reinstall the batteries in the display according to the diagram
in the battery compartment.
5. Do not press any buttons for at least 15 minutes after installing
the batteries. (Let them establish a good connection.)
6. An outdoor temperature should be showing on your display. You
can now put your outdoor sensor back outside.
Other frequently asked questions:
What should I do when batteries need
to be replaced in wireless thermometers?
Why is the humidity reading either too
low or too high on my wireless thermometers?
Where is a good place to put wireless thermometers?
What if my outdoor transmitter/wireless
thermometers is not placed properly?
How should I fix a weather station/wireless
thermometers that has not started properly?
|
